Push-In Adaptor


Push-In Adaptor

  • For different materials
  • Internal seal
  • Resistant to 0.5 bar

Push-In Adaptor – for the internal connection of pipe systems with different dimensions and materials

The Single Pipe Connector joints pipe systems with different dimensions
and materials and can be used for flush-mounting and non-
buried pipe connections.

The Push-In Adaptor is made from a durable EPDM rubber and has a noise reducing impact on downpipes.

PHONE Sales & Technical-Team
+49 2234 928 03-0
Description
Push-In Adaptor
Technical Specification

Push-In Adaptor for the internal connection of pipe systems with different dimensions and materials.

Manufacturer:

MÜCHER DICHTUNGEN®, 50226 Frechen, T +49 2234 928 03-0, F -55

Pressure Tightness:

0.5 bar water / -0.3 bar vacuum

Sealing Material:

EPDM rubber according to DIN EN 681-1

Stainless Steel:

V2A/1.4301 nach DIN EN 10088-2

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

DIN EN 681-1, CE16
PUSH-IN ADAPTOR MSA
Article NumberReferenceA
Size Range
(mm)
B
Size Range
(mm)
L
Length
(mm)
resistant to
(bar)
Weight
(kg)
500117Push-In Adaptor MSA 7569-7573-851000.50.2
500116Push-In Adaptor MSA 100100-105100-1161160.50.3
500118Push-In Adaptor MSA 125117-125120-1411250.50.5
500138Push-In Adaptor MSA 150150-168145-1571450.50.8
  • Position pipe ends.
    Position pipe ends.
  • Insert Single Pipe Connector into larger pipe. Apply lubricant to plain ended pipe.
    Insert Single Pipe Connector into larger pipe. Apply lubricant to plain ended pipe.
  • Insert smaller pipe into Single Pipe Connector.
    Insert smaller pipe into Single Pipe Connector.

steckadapter 01 3d

DIBt-Approval (Z-42.5-600)

TitleFormatSize 
Datasheet (PDF)pdf871.03 KBDownload
Product Range (XLS)xls26.50 KBDownload