Internal Drain Connector MRS


MRS

Internal Drain Connector MRS

  • For different nominal sizes
  • Internal seal
  • Resistant to 0.5 bar
  • Easy & Quick installation

Internal Drain Connector - for the internal connection of pipes with different dimensions.

The internal drain connector is suitable for flush mounting as well as for exposed pipe connections. The MRS is made of a high-quality EPDM sealing material, which is characterized by durability and has a noise-reducing effect in downpipes.

PHONE Sales & Technical-Team
+49 2234 928 03-0
Description
Internal Drain Connector MRS
Technical Specification

Internal Drain Connector - for the internal connection of pipes with different dimensions.

Manufacturer:

MÜCHER DICHTUNGEN®, 50226 Frechen, T +49 2234 928 03-0, F -55

Pressure Tightness:

0.5 bar water / -0.3 vacuum

Sealing Material:

EPDM rubber according to DIN EN 681-1

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

DIN EN 681-1
INTERNAL DRAIN CONNECTOR MRS
Artice NumberReferenceA Size Range (mm)B Size Range(mm)L Length(mm)Resistant to (bar) Weight (kg)
500130Internal Drain Connector MRS40/50103670.50.15
500131Internal Drain Connector MRS75/90103670.50.10
  • Position pipe ends.
    Position pipe ends.
  • Fold in or cut off internal drain connector at the desired position, depending on the connection situation.
    Fold in or cut off internal drain connector at the desired position, depending on the connection situation.
  • Insert internal drain connector into larger pipe, apply lubricant and push in smaller pipe.
    Insert internal drain connector into larger pipe, apply lubricant and push in smaller pipe.

DIBt-Approval (Z-42.5-600)

TitleFormatSize 
Datasheet (PDF)pdf277.46 KBDownload
Product Range (XLS)xls25.00 KBDownload