TWISTEE®


Sewer Saddle

TWISTEE®

  • Connects to solid walled main sewers from DN 300
  • Standard core drill size of 200mm
  • Versatile - will connect to any DN 150 lateral pipe
  • Resistant to shear and vertical loads resulting from differential settlement
  • Resistant to 0.6 bar hydrostatic preussure

Sewer Saddle TWISTEE® - for connecting lateral pipes to solid walled main sewers

As the Sewer Saddle TWISTEE® DN 150 has been designed with a spigot, it offers the possibility to connect to any DN 150 lateral pipe material.

For main sewers DN 300 and above with a minimum wall thickness of 60 mm.

 

PHONE Sales & Technical-Team
+49 2234 928 03-0
Description
TWISTEE®
Technical Specification

Sewer Saddle TWISTEE® for connecting lateral pipes to solid walled main sewers from DN 300 with a minimum wall thickness of 60 mm.

Manufacturer:

MÜCHER DICHTUNGEN®, D-50226 Frechen, T +49 2234 928 03-0, F -55

Pressure Tightness:

0.6 bar Water / -0,3 bar vacuum

Jetting Resistance:

170 bar

Sealing Material:

EPDM rubber according to DIN EN 681-1

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

DIBt-Approval (Z-42.1-567), DIN EN 681-1, CE18
SEWER SADDLE TWISTEE
Article NumberReferenceA
Outside-Ø
(mm)
Wall Thickness
Main Sewer
(mm)
Core Drill
(mm)
L1
Length
(mm)
L2
Length
(mm)
resistant
(bar)
Weight
(kg)
28202160TWISTEE® Plastic DN 160 with coupling16060-85200 +/- 1,060750.62.1
28202161TWISTEE® Clay DN 150 with adaptor16060-85200 +/- 1,060750.62.2
28202162TWISTEE® Twin wall plastic / GRP
DN 150 with coupling
16060-85200 +/- 1,060750.62.2
28202163TWISTEE® DN 15016060-85200 +/- 1,060750.61.2
28600001Strap Wrench0.2
  • 1. Drill a clean hole using a core drill. For reinforced concrete pipes apply corrosion protection liquid on the inside wall of the hole.
    1. Drill a clean hole using a core drill. For reinforced concrete pipes apply corrosion protection liquid on the inside wall of the hole.
  • 2. Insert TWISTEE® gasket considering flow direction and apply the lubricant on the thread.
    2. Insert TWISTEE® gasket considering flow direction and apply the lubricant on the thread.
  • 3. Screw the TWISTEE® spigot into the gasket using the strap wrench.
    3. Screw the TWISTEE® spigot into the gasket using the strap wrench.

DIBt-Approval (Z-42.1-567), DIN EN 681-1, CE18

TitleFormatSize 
Datasheet (PDF)pdf641.04 KBDownload
TECHNICAL SPECIFICATION (DOC)doc167.00 KBDownload
Service Specifications (GAEB-90)csv549.00 BDownload